Inline Multi Stage Pump
AKO ENGINEERING LTD
AKO ENGINEERING offers various categories of the world best pumps (as a matter of fact) Grundfos pumps for hospitals, high-rise buildings, irrigation systems and other applications where constant pressure is required to meet fluctuations in water demand. Discover the large selection of all of our pump sets here (from AKO Engineering).
Inline Multi Stage Pumps
Inline Multi Stage Pumps
Multistage in-line pumps are used in systems where a high head is required. Several impeller stages are connected in series and the inlet and outlet are on the same level. Multistage in-line pumps are used for water supply, water treatment and almost all industrial applications, including aggressive liquids.
CR
Inline Multi Stage Pump
Vertical, multistage centrifugal pump with suction and discharge ports on the same level. The pump head and base are in cast iron – all other wetted parts are in stainless steel (EN 1.4301).
- Water Treatment Fertigation, Chemigation & Dosing
- Controls & Digital Groundwater Management
- Drip, Micro Spray & Soaker Hose Irrigation
- Frost protection
- Rotor & Spray Irrigation
- Livestock & Wildlife Watering
- Livestock watering with solar solutions
- Pivot & Lateral
- Irrigation
- Agriculture solar solutions
- Solar boosting and water supply solutions
- Ground water transfer
- Commercial air conditioning
- Commercial heating
- Commercial water pressure boosting
- District cooling
- District heating
- Drinking water treatment
- Irrigation
- Industrial cooling
- Desalination
- Industrial heating
- Machining
- Process liquids transfer
- Industrial process water treatment
- Industrial cleaning process
- Industrial water supply & transfer
- Industrial wastewater treatment & reuse
- Solar water solutions
- Solar Controls & Digital
- Water Management
- Solar Water Treatment Fertigation & Dosing
- Surface water intake
- Community water supply
- Community solar solutions
- Municipal solar solutions
- Water distribution
Max Flow: 204m3/h
Head Max: 321m
Liquid Temperature: -30..120oC
p max: 33bar
CRN
Inline Multi Stage Pump
Vertical, multistage centrifugal pump with suction and discharge ports on the same level. Pump materials in contact with the liquid are in high-grade stainless steel (EN 1.4401)
- Water Treatment Fertigation, Chemigation & Dosing
- Controls & Digital Groundwater Management
- Drip, Micro Spray & Soaker Hose Irrigation
- Frost protection
- Rotor & Spray Irrigation
- Livestock & Wildlife Watering
- Livestock watering with solar solutions
- Pivot & Lateral Irrigation
- Agriculture solar solutions
- Solar boosting and water supply solutions
- Ground water transfer
- Commercial air conditioning
- Commercial heating
- Commercial water pressure boosting
- District cooling
- District heating
- Drinking water treatment
- Irrigation
- Industrial cooling
- Desalination
- Industrial heating
- Machining
- Process liquids transfer
- Industrial process water treatment
- Industrial cleaning process
- Industrial water supply & transfer
- Industrial wastewater treatment & reuse
- Solar water solutions
- Solar Controls & Digital Water Management
- Solar Water Treatment Fertigation & Dosing
- Surface water intake
- Community water supply
- Community solar solutions
- Municipal solar solutions
- Water distribution
Max Flow: 123m3/h
Head Max: 373m
Liquid Temperature: -40..150oC
p max: 50bar
CRE
Inline Multi Stage Pump
Vertical, multistage centrifugal pump with integrated frequency converter. The pump head and base are in cast iron – all other wetted parts are in stainless steel (EN 1.4301)
- Water Treatment Fertigation, Chemigation & Dosing
- Controls & Digital Groundwater Management
- Drip, Micro Spray & Soaker Hose Irrigation
- Frost protection
- Rotor & Spray Irrigation
- Livestock & Wildlife Watering
- Livestock watering with solar solutions
- Pivot & Lateral Irrigation
- Agriculture solar solutions
- Solar boosting and water supply solutions
- Ground water transfer
- Commercial air conditioning
- Commercial heating
- Commercial water pressure boosting
- District cooling
- District heating
- Drinking water treatment
- Irrigation
- Industrial cooling
- Desalination
- Industrial heating
- Machining
- Process liquids transfer
- Industrial process water treatment
- Industrial cleaning process
- Industrial water supply & transfer
- Industrial wastewater treatment & reuse
- Solar water solutions
- Solar Controls & Digital Water Management
- Solar Water Treatment Fertigation & Dosing
- Surface water intake
- Community water supply
- Community solar solutions
- Municipal solar solutions
- Water distribution
Max Flow: 70m3/h
Head Max: 254m
Liquid Temperature: -30..120oC
p max: 30bar
CRFLEX
Inline Multi Stage Pump
The Grundfos CRFlex in-line multi-stage solar surface pump is designed for renewable energy supply and can operate in remote areas lacking mains electricity. Powered by a solar panel, the system is especially suitable for supplying water in applications such as the watering of livestock, pressure boosting and irrigation.
- Water Treatment Fertigation, Chemigation & Dosing
- Controls & Digital Groundwater Management
- Drip, Micro Spray & Soaker Hose Irrigation
- Frost protection
- Rotor & Spray Irrigation
- Livestock & Wildlife Watering
- Livestock watering with solar solutions
- Pivot & Lateral Irrigation
- Agriculture solar solutions
- Solar boosting and water supply solutions
- Ground water transfer
Solar water solutions - Solar Controls & Digital Water Management
- Solar Water Treatment Fertigation & Dosing
- Community water supply
- Community solar solutions
- Municipal solar solutions
p max: 25bar
Liquid Temperature: -25.. 120oC
CRI
Inline Multi Stage Pump
The Grundfos CRI pump is an in-line, multi-stage pump available in a wide variety of flow and pressure sizes. Built from AISI 304 grade stainless steel, the CRI is ideally suited for water and other non-corrosive liquids. Use the CRI for liquid transfer, glycol, circulation systems and pressure boosting of cold or hot water and slightly aggressive liquids.
- Water Treatment Fertigation, Chemigation & Dosing
- Controls & Digital Groundwater Management
- Drip, Micro Spray & Soaker Hose Irrigation
- Frost protection
- Rotor & Spray Irrigation
- Livestock & Wildlife Watering
- Livestock watering with solar solutions
- Pivot & Lateral Irrigation
- Agriculture solar solutions
- Solar boosting and water supply solutions
- Ground water transfer
- Commercial air conditioning
- Commercial heating
- Commercial water pressure boosting
- District cooling
- District heating
- Drinking water treatment
- Irrigation
- Industrial cooling
- Desalination
- Industrial heating
- Machining
- Process liquids transfer
- Industrial process water treatment
- Industrial cleaning process
- Industrial water supply & transfer
- Industrial wastewater treatment & reuse
- Solar water solutions
- Solar Controls & Digital Water Management
- Solar Water Treatment Fertigation & Dosing
- Surface water intake
- Community water supply
- Community solar solutions
- Municipal solar solutions
- Water distribution
Max Flow: 29m3/h
Head Max: 252m
Liquid Temperature: -20..120oC
p max: 25bar
CRIE
Inline Multi Stage Pump
The CRIE pump is an in-line, multi-stage pump with a built-in variable speed drive available in a wide variety of flow and pressure sizes. Built from AISI 304 grade stainless steel the CRIE is suitable for non-corrosive liquids. The built-in or external frequency converter and optional IE5 motor make the CRIE ideally suited when top performance and control, as well as industry-leading energy efficiency, are required. Use the CRIE for liquid transfer, circulation and pressure boosting of cold or hot water.
- Water Treatment Fertigation, Chemigation & Dosing
- Controls & Digital Groundwater Management
- Drip, Micro Spray & Soaker Hose Irrigation
- Frost protection
- Rotor & Spray Irrigation
- Livestock & Wildlife Watering
- Livestock watering with solar solutions
- Pivot & Lateral Irrigation
- Agriculture solar solutions
- Solar boosting and water supply solutions
- Ground water transfer
- Commercial air conditioning
- Commercial heating
- Commercial water pressure boosting
- District cooling
- District heating
- Drinking water treatment
- Irrigation
- Industrial cooling
- Desalination
- Industrial heating
- Machining
- Process liquids transfer
- Industrial process water treatment
- Industrial cleaning process
- Industrial water supply & transfer
- Industrial wastewater treatment & reuse
- Solar water solutions
- Solar Controls & Digital Water Management
- Solar Water Treatment Fertigation & Dosing
- Surface water intake
- Community water supply
- Community solar solutions
- Municipal solar solutions
- Water distribution
Max Flow: 28m3/h
Head Max: 244m
Liquid Temperature: -20..120oC
p max: 25bar
READY TO MAKE ENQUIRES OR PURCHASE
Fill the forms below this field with the necessary information and we will get back to you shortly
Fill the forms below this field with the necessary information and we will get back to you shortly
Get in Touch
With Us Through
+233 302 511 182
+233 244 263 555
+233 244 367 071
Call, Send us a Message or visit us at;
Accra. House No. 89
Boundary Road- East Legon Close to the Cockpit Hotel
info@akoengltd.com
www.akoengltd.com
Copyright 2023 © AKO ENGINEERING